Changes between Version 3 and Version 4 of Internal/Mapping/Topologies/Topo4


Ignore:
Timestamp:
Sep 6, 2006, 9:20:29 PM (18 years ago)
Author:
zhibinwu
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/Mapping/Topologies/Topo4

    v3 v4  
    88== Steps ==
    99In order to achieve this, the following steps are needed
    10  * The corner node (1,2) is selected as the AP
    11  * Select the set of nodes on the grid as required (clients)
    12  * Disable autorate adaptation in the card
    13  * Set the PHY rates to fixed rates based on the distribution required by the experimenter
     10 * run the nodehandler script in the grid
     11 * run the post-process perl script
     12 * view the PS file containing throughput comparison plots for each flow.
    1413
    1514== Scripts ==
    16 The script to run this experiment can be found [http://www.orbit-lab.org/attachment/wiki/Internal/Mapping/Topologies/Topo4/macfair.rb here]
     15 * The nodehandler script (RUBY) to run this experiment:
     16   * [http://www.orbit-lab.org/attachment/wiki/Internal/Mapping/Topologies/Topo4/macfair.rb 4flows with Master/managed settings]
     17 * The perl script to postprocess database and plot the results in EPS file.
     18 * The gnuplot configuration file
    1719
    1820== Sample Results ==
    19 We plot the throughput for each individual session using the experiment script provided above.
     21We plot the (Throughput, RSSI, PHY rate) for each individual session using the experiment script provided above.