wiki:Tutorials/k0SDR/Tutorial25

Version 11 (modified by tingjunchen, 7 years ago) ( diff )

Full-Duplex Wireless using USRP N210

Description

In this tutorial, we'll use node11-10 in the main grid (equipped with a USRP N210) to transmit and receive a single frequency over the air to demonstrate full-duplex wireless capability using the Columbia FlexICoN's Gen-1 Frequency-Flat Amplitude- and Phase-based RF Canceller. For more information, please read

  1. Chen, J. Zhou, N. Grimwood, R. Fogel, J. Marasevic, H. Krishnaswamy, and G. Zussman, “Demo: Full-duplex Wireless based on a Small-Form-Factor Analog Self-Interference Canceller,” in Proc. ACM MobiHoc'16, 2016. PDF

We also thank Mahmood Baraani Dasterjerdi and Steven Alfano for their contributions.

Hardware / Software Resources utilized

  1. USRP N210 with node11-10 in the ORBIT main grid
  2. SUB-20: The SUB-20 is a multi-interface USB adapter for providing popular interfaces between PC (USB host) and different hardware devices. Specifically, we use the SPI module on SUB-20 to control and configure our hardware. The user manual can be found here.
  3. UHD
  4. The Eigen C++ Library: The Eigen C++ library is used for basic algebra in channel estimation and digital self-interference cancellation. The Eigen releases can be found on the Eigen website. We used the latest stable release Eigen 3.3.4 through our testings and experiments.

All the source code is publicly available at here.

Set up

  • Login into reserved domain: ssh username@conslole.grid.orbit-lab.org

    Login into reserved domain

    During your approved time slot, you will be able to ssh into the console of the respective domain. A console is a dedicated machine that allows access to all resources in that domain.

    For example, to access the sandbox1:

    yourhost>ssh username@console.sb1.orbit-lab.org
    
    Using username "username".
    Authenticating with public key "xxxxxxxxx"
    Welcome to Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-36-generic x86_64)
    
     * Documentation:  https://help.ubuntu.com/
    
      System information as of Mon Jan 28 20:25:50 EST 2013
    
      System load:  0.0               Processes:           93
      Usage of /:   2.7% of 69.43GB   Users logged in:     0
      Memory usage: 6%                IP address for eth0: 10.50.18.10
      Swap usage:   0%                IP address for eth1: 10.18.0.10
    
      Graph this data and manage this system at https://landscape.canonical.com/
    
    9 packages can be updated.
    0 updates are security updates.
    
    |-----------------------------------------------------------------|
    |                 *** For authorized use only ***                 |
    | This system is for the use of authorized users only.  All users |
    | are expected to comply with the "Acceptable Use Policy" availa- |
    | ble at http://www.orbit-lab.org/AUP.html                        |
    | Individuals using this computer system, are subject to having   |
    | all of their activities on this system monitored and recorded   |
    | by system personnel.                                            |
    |                                                                 |
    | Anyone using this system expressly consents to such monitoring  |
    | and is advised that if such monitoring reveals possible         |
    | evidence of criminal activity, system personnel may provide the |
    | evidence of such monitoring to law enforcement officials.       |
    |                                                                 |
    | Email question, comments or problems to help@orbit-lab.org      |
    |-----------------------------------------------------------------|
    
    username@console.sb1:~$ 
    
  • Load an image on the node: omf load -i orbit-flexicon.ndz -t node11-10

    Load an Image

    1. Before we begin using the nodes, it's a good idea to check their status first. This is done with the omf stat command.

      omf stat

      This omf command is used to display the power status of the node/domain.

      Usage: omf stat

      username@consoles.outdoor:omf stat
      Returns the status of the nodes in a testbed
      Usage:
            omf-5.4 stat [-h] [-s] [-t TOPOLOGY] [-c AGGREGATE]
       
            With: 
            -h, --help                print this help message
            -s, --summary             print a summary of the node status for the testbed
            -c, --config AGGREGATE    use testbed AGGREGATE
            -t, --topology TOPOLOGY   a valid topology file or description (defaults to 'system:topo:all')
       
            Some Examples: 
                          omf-5.4 stat
                          omf-5.4 stat -s
                          omf-5.4 stat -t omf.nicta.node1,omf.nicta.node2 -c sb1
                          omf-5.4 stat -t system:topo:all -c grid
      

      Individual nodes are identified in the output of stat command by their fully qualified domain name (FQDN). This establishes their "coordinates" and the "domain" to which they belong. Nodes in different domains typically can NOT see each other. Node can be in 1 of 3 states:

      POWEROFF Node is Available for use but turned off
      POWERON Node is Available and is on
      NOT REGISTERED Node is not Available for use

      Example: omf stat on the outdoor domain

      user@console.outdoor:~# omf stat -t all
      
       INFO NodeHandler: OMF Experiment Controller 5.4 (git 6d34264)
       INFO NodeHandler: Slice ID: default_slice (default)
       INFO NodeHandler: Experiment ID: default_slice-2012-10-14t14.42.15-04.00
       INFO NodeHandler: Message authentication is disabled
       INFO Experiment: load system:exp:stdlib
       INFO property.resetDelay: value = 210 (Fixnum)
       INFO property.resetTries: value = 1 (Fixnum)
       INFO Experiment: load system:exp:eventlib
       INFO Experiment: load system:exp:stat
       INFO Topology: Loading topology ''.
       INFO property.nodes: value = "system:topo:all" (String)
       INFO property.summary: value = false (FalseClass)
       INFO Topology: Loading topology 'system:topo:all'.
       Talking to the CMC service, please wait
      -----------------------------------------------
       Domain: outdoor.orbit-lab.org
       Node: node3-6.outdoor.orbit-lab.org   	 State: NOT REGISTERED
       Node: node3-3.outdoor.orbit-lab.org   	 State: POWEROFF
       Node: node2-10.outdoor.orbit-lab.org    State: POWEROFF
       Node: node1-10.outdoor.orbit-lab.org    State: POWEROFF
       Node: node1-8.outdoor.orbit-lab.org   	 State: POWERON
       Node: node1-6.outdoor.orbit-lab.org   	 State: POWERON
       Node: node3-2.outdoor.orbit-lab.org   	 State: POWEROFF
       Node: node3-1.outdoor.orbit-lab.org   	 State: POWEROFF
       Node: node1-3.outdoor.orbit-lab.org   	 State: POWERON
       Node: node3-5.outdoor.orbit-lab.org   	 State: POWEROFF
       Node: node2-5.outdoor.orbit-lab.org   	 State: NOT REGISTERED
       Node: node1-2.outdoor.orbit-lab.org   	 State: POWERON
      -----------------------------------------------
       INFO Experiment: Switching ON resources which are OFF
       INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
       INFO NodeHandler: 
       INFO NodeHandler: Shutting down experiment, please wait...
       INFO NodeHandler: 
       INFO run: Experiment default_slice-2012-10-14t14.42.15-04.00 finished after 0:6
      

    2. It is recommended that the node be in the POWEROFF state prior to any experiment process. If the node is in the POWERON state you can use the omf tell command to get the node into the off state.

      omf tell

      OMF command to control the power state/reset the nodes.

      Usage: omf tell

      user@console:omf tell
      Switch ON/OFF and reboot the nodes in a testbed
      Usage:
            omf tell [-h] -t TOPOLOGY -a ACTION [-c AGGREGATE]
       
            With: 
            -h, --help           print this help message
       
            -a, --action ACTION  specify an action
            ACTION:
            on              turn node(s) ON
            offs            turn node(s) OFF (soft)
            offh            turn node(s) OFF (hard)
            reboot          reboots node(s) (soft)
            reset           resets node(s) (hard)
       
            -h, --help                print this help message
            -t, --topology TOPOLOGY   a valid topology file or description (MANDATORY)
            -c, --config AGGREGATE    use testbed AGGREGATE
       
            Some Examples: 
                          omf tell -a reset -t node1-1.grid.orbit-lab.org
                          omf tell -a on -t system:topo:all -c grid
                          omf tell -a reboot -t node1-1
                          omf tell -a offh -t [1..2,1..5]
                          omf tell -a offh -t system:topo:all
                          omf tell -a reset -t system:topo:imaged
      

      The commands are: on, offh (equivalent to pulling out the power cord), offs (software shutdown), reboot (software reboot) and reset (hardware reset).

      Example: turn off node1-1 on the outdoor domain

      user@console.outdoor:~# omf tell -a offh -t node1-1
      
       INFO NodeHandler: OMF Experiment Controller 5.4 (git 3fb37b9)
       INFO NodeHandler: Reading configuration file /etc/omf-expctl-5.4/services.yaml
       INFO NodeHandler: Add domain http - http://internal1.orbit-lab.org:5054/
       INFO NodeHandler: Add domain http - http://repository1.orbit-lab.org:5054/
       INFO NodeHandler: Slice ID: default_slice (default)
       INFO NodeHandler: Experiment ID: default_slice-2014-09-30t00.24.28.504-04.00
       INFO NodeHandler: Message authentication is disabled
       INFO Experiment: load system:exp:stdlib
       INFO property.resetDelay: resetDelay = 230 (Fixnum)
       INFO property.resetTries: resetTries = 1 (Fixnum)
       INFO Experiment: load system:exp:eventlib
       INFO Experiment: load system:exp:winlib
       INFO Experiment: load system:exp:tell
       INFO property.nodes: nodes = "node1-1" (String)
       INFO property.command: command = "offh" (String)
      
      Talking to the CMC service, please wait
      -----------------------------------------------
       Node: node1-1.outdoor.orbit-lab.org   	 Reply: OK
      -----------------------------------------------
      
       INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
       INFO NodeHandler: 
       INFO NodeHandler: Shutting down experiment, please wait...
       INFO NodeHandler: 
       INFO run: Experiment default_slice-2014-09-30t00.24.28.504-04.00 finished after 0:10
      

    3. Once node set is on an POWEROFF state, load an image with omf load command

      omf load

      Load command is used to put an image onto the hard disk of the node.

      Usage: omf load

      Install a given disk image on the nodes in a testbed
      Usage:
            omf-5.4 load [-h] [-i IMAGE_PATH] [-o TIMEOUT] [-t TOPOLOGY] [-c AGGREGATE]
       
            With: 
            -h, --help                print this help message
            -c, --config AGGREGATE    use testbed AGGREGATE
            -t, --topology TOPOLOGY   a valid topology file or description (defaults to 'system:topo:all')
                                      (if a file 'TOPOLOGY' doesn't exist, interpret it as a comma-separated list of nodes)
            -i, --image IMAGE         disk image to load
                                      (default is 'baseline.ndz', the latest stable baseline image)
            -o, --timeout TIMEOUT     a duration (in sec.) after which imageNodes should stop waiting for
                                      nodes that have not finished their image installation
                                      (default is 800 sec, i.e. 13min 20sec)
                --outpath PATH        Path where the resulting Topologies should be saved
                                      (default is '/tmp')
                --outprefix PREFIX    Prefix to use for naming the resulting Topologies
                                      (default is your experiment ID)
       
            Some Examples: 
                          omf-5.4 load
                          omf-5.4 load -t system:topo:all -i baseline-2.4.ndz
                          omf-5.4 load -t omf.nicta.node1 -i wireless-2.6.ndz
                          omf-5.4 load -t omf.nicta.node1,omf.nicta.node2 -i baseline.ndz -o 400
                          omf-5.4 load -t system:topo:circle -i my_Own_Image.ndz
                          omf-5.4 load -t my_Own_Topology -i baseline-2.2.ndz -t 600 -c grid
                          omf-5.4 load -t my_Own_Topology --outpath ./ --outprefix my_Own_Prefix
      

      Two important arguments are TOPOLOGY describing the set of nodes one wishes to image , and !IMAGE specifying the name of the image one wants to load the nodes with. If the imaging process does not does not finish within the default timeout period, that period can be increase by using the -o flag (e.g. -o 1600). Typical command to load both nodes of sandbox 1 with the baseline image would look like:

      Example: omf load-i baseline.ndz -t node1-1

      username@console.sb3:~$ omf load -i baseline.ndz -t node1-1
      
      DEBUG FQDN:console.sb3.orbit-lab.org:
       INFO NodeHandler: OMF Experiment Controller 5.4 (git 861d645)
       INFO NodeHandler: Reading configuration file /etc/omf-expctl-5.4/services.yaml
       INFO NodeHandler: Add domain http - http://internal1.orbit-lab.org:5054/
       INFO NodeHandler: Add domain http - http://repository1.orbit-lab.org:5054/
       INFO NodeHandler: Add domain http - http://external1.orbit-lab.org:5054/
       INFO NodeHandler: Slice ID: pxe_slice
       INFO NodeHandler: Experiment ID: pxe_slice-2018-08-08t13.41.37.814-04.00
       INFO NodeHandler: Message authentication is disabled
       INFO Experiment: load system:exp:stdlib
       INFO property.resetDelay: resetDelay = 230 (Fixnum)
       INFO property.resetTries: resetTries = 1 (Fixnum)
       INFO Experiment: load system:exp:eventlib
       INFO Experiment: load system:exp:winlib
       INFO Experiment: load system:exp:imageNode
       INFO property.nodes: nodes = "node1-1" (String)
       INFO property.image: image = "baseline.ndz" (String)
       INFO property.domain: domain = "sb3.orbit-lab.org" (String)
       INFO property.outpath: outpath = "/tmp" (String)
       INFO property.outprefix: outprefix = "pxe_slice-2018-08-08t13.41.37.814-04.00" (String)
       INFO property.timeout: timeout = 800 (Fixnum)
       INFO property.resize: resize = nil (NilClass)
       INFO Topology: Loaded topology 'system:topo:registered'.
       INFO property.resetDelay: resetDelay = 100 (Fixnum)
       INFO Experiment: Resetting resources
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [0 sec.]
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [10 sec.]
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [20 sec.]
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [30 sec.]
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [40 sec.]
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/1/1 - (still down: node1-1.sb3.orbit-lab.org) [50 sec.]
       INFO exp: Progress(0/0/1): 0/0/0 min(node1-1.sb3.orbit-lab.org)/avg/max (59) - Timeout: 790 sec.
       INFO ALL_UP: Event triggered. Starting the associated tasks.
       INFO BRING_UP: Event triggered. Starting the associated tasks.
       INFO Experiment: Bringing up resources
       INFO exp: Progress(0/0/1): 50/50/50 min(node1-1.sb3.orbit-lab.org)/avg/max (59) - Timeout: 780 sec.
       INFO exp: Progress(0/0/1): 80/80/80 min(node1-1.sb3.orbit-lab.org)/avg/max (59) - Timeout: 770 sec.
       INFO exp: Progress(1/0/1): 100/100/100 min()/avg/max (59) - Timeout: 760 sec.
       INFO exp:  -----------------------------
       INFO exp:  Imaging Process Done
       INFO exp:  1 node successfully imaged - Topology saved in '/tmp/pxe_slice-2018-08-08t13.41.37.814-04.00-topo-success.rb'
       INFO exp:  -----------------------------
       INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
       INFO NodeHandler:
       INFO NodeHandler: Shutting down experiment, please wait...
       INFO NodeHandler:
       INFO NodeHandler: Shutdown flag is set - Turning Off the resources
       INFO run: Experiment pxe_slice-2018-08-08t13.41.37.814-04.00 finished after 1:44
      
      

      If the node is in the NOT REGISTERED state, you may need to wait for it to recover the POWEROFF state (it some times requires a few moments for the services to sync up). If the node takes more than 60 seconds to come out of the NODE NOT AVAILABLE state please report it to an administrator.
  • Turn on the node: omf tell -a on -t node11-10

    Turn the Nodes ON

    To turn the nodes on use omf tell command:

    omf tell

    OMF command to control the power state/reset the nodes.

    Usage: omf tell

    user@console:omf tell
    Switch ON/OFF and reboot the nodes in a testbed
    Usage:
          omf tell [-h] -t TOPOLOGY -a ACTION [-c AGGREGATE]
     
          With: 
          -h, --help           print this help message
     
          -a, --action ACTION  specify an action
          ACTION:
          on              turn node(s) ON
          offs            turn node(s) OFF (soft)
          offh            turn node(s) OFF (hard)
          reboot          reboots node(s) (soft)
          reset           resets node(s) (hard)
     
          -h, --help                print this help message
          -t, --topology TOPOLOGY   a valid topology file or description (MANDATORY)
          -c, --config AGGREGATE    use testbed AGGREGATE
     
          Some Examples: 
                        omf tell -a reset -t node1-1.grid.orbit-lab.org
                        omf tell -a on -t system:topo:all -c grid
                        omf tell -a reboot -t node1-1
                        omf tell -a offh -t [1..2,1..5]
                        omf tell -a offh -t system:topo:all
                        omf tell -a reset -t system:topo:imaged
    

    The commands are: on, offh (equivalent to pulling out the power cord), offs (software shutdown), reboot (software reboot) and reset (hardware reset).

    Example: turn off node1-1 on the outdoor domain

    user@console.outdoor:~# omf tell -a offh -t node1-1
    
     INFO NodeHandler: OMF Experiment Controller 5.4 (git 3fb37b9)
     INFO NodeHandler: Reading configuration file /etc/omf-expctl-5.4/services.yaml
     INFO NodeHandler: Add domain http - http://internal1.orbit-lab.org:5054/
     INFO NodeHandler: Add domain http - http://repository1.orbit-lab.org:5054/
     INFO NodeHandler: Slice ID: default_slice (default)
     INFO NodeHandler: Experiment ID: default_slice-2014-09-30t00.24.28.504-04.00
     INFO NodeHandler: Message authentication is disabled
     INFO Experiment: load system:exp:stdlib
     INFO property.resetDelay: resetDelay = 230 (Fixnum)
     INFO property.resetTries: resetTries = 1 (Fixnum)
     INFO Experiment: load system:exp:eventlib
     INFO Experiment: load system:exp:winlib
     INFO Experiment: load system:exp:tell
     INFO property.nodes: nodes = "node1-1" (String)
     INFO property.command: command = "offh" (String)
    
    Talking to the CMC service, please wait
    -----------------------------------------------
     Node: node1-1.outdoor.orbit-lab.org   	 Reply: OK
    -----------------------------------------------
    
     INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
     INFO NodeHandler: 
     INFO NodeHandler: Shutting down experiment, please wait...
     INFO NodeHandler: 
     INFO run: Experiment default_slice-2014-09-30t00.24.28.504-04.00 finished after 0:10
    

Attachments (7)

Note: See TracWiki for help on using the wiki.