Changes between Version 6 and Version 7 of Tutorials/k0SDR/Tutorial19

Timestamp:

Jun 13, 2016, 4:04:39 PM (8 years ago)

Author:

prasanthi

Comment:

—

Tutorials/k0SDR/Tutorial19

@@ -46 +46 @@
 }}}
 * Run uhd_usrp_probe. This might throw an error as shown below, as the X310 might contain a firmware build that is not compatible with the RFNoC UHD installation.
-
 {{{
 root@node18-20:~# uhd_usrp_probe --args="addr=192.168.10.2"
@@ -79 +78 @@
 
 * In case of the above error, you can burn the appropriate FPGA image using uhd_image_loader as shown above, or using usrp_x3xx_fpga_jtag_programmer.sh found in uhd/tools.When the jtag programmer is used, the FPGA image is lost on power cycling.
-
 {{{
 root@node18-20:~/uhd/tools# ./usrp_x3xx_fpga_jtag_programmer.sh --fpga-path="/usr/local/share/uhd/images/usrp_x310_fpga_HGS.bit"
@@ -93 +91 @@
 
 * Now running uhd_usrp_probe should print out a lot of messages with this at the end : the list of RFNoC blocks in the current FPGA image.
-
 {{{
 -- ========== Full list of RFNoC blocks: ============