= Working with GNU and Nutaq = == Description == This example will demonstrate how to use GRC (GNU Radio Companion) with Nutaq's Zepto SDR. == Set up == To get started, make a reservation on the grid and then load the ''ubuntu-14-04-64bit-sdr.ndz'' on two nodes - one node with a Zepto SDR and the other node a USRP. For this example we'll use node20-13 and node20-20 which have a Zepto SDR and USRP, respectively. {{{ nilanjan@console.grid:~$ omf load -i ubuntu-14-04-64bit-sdr.ndz -t [[20,13],[20,20]] }}} Turn on both nodes and verify that the interface to each SDR is configured correctly. Verify connection to Zepto SDR: {{{ ifconfig eth2 192.168.0.1 netmask 255.255.255.0 mtu 9000 up ping 192.168.0.101 }}} Verify connection to USRP: {{{ ifconfig eth2 192.168.10.1 netmask 255.255.255.0 mtu 9000 up ping 192.168.10.2 }}} == Run the GRC scripts == Download the receiver ''zepto_rx.grc'' into node20-13 and open it with GNU Radio Companion. {{{ root@node20-13:~# cd /opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples root@node20-13:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples# wget http://www.orbit-lab.org/raw-attachment/wiki/Tutorials/k0SDR/Tutorial10/zepto_rx.grc root@node20-13:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq/examples# cd .. root@node20-13:/opt/Nutaq/ADP6/ADP_MicroTCA/sdk/gnuradio/gr-nutaq#sh launch_gnuradio_companion.sh & }}} A window should pop up similar to the following: || [[Image(zepto_rx.png, width=500px)]] || Next download the transmitting side ''usrp_tx.grc'' and open with GNU Radio Companion. {{{ root@node20-20:~# wget http://www.orbit-lab.org/raw-attachment/wiki/Tutorials/k0SDR/Tutorial10/usrp_tx.grc root@node20-20:~# gnuradio-companion }}} A window should pop up similar to the following: || [[Image(usrp_tx.png, width=500px)]] ||