== Page of requirements for new motherboards, and potential examples ==

Newest Socket and chipset is 1150, H,Z, or Q87, for 4th gen I7s.
Previous are on 1155, and 77.

Two form factors are Mini-ITX and Thin Mini-ITX.
Thin Mini-ITX uses mobile ram, and external 19V power, but is half height. Many options only available in this form factor.


Hard requirements
1. 2x GbE ports
1. 2x Mini Pci or PciE slots, (1 half height ok)
1. Intel AMT support for power on, power off, restart
1. Both mini ports on top side of motherboard
1. ITX form factor
1. Desktop Processor support

Soft Requirements
1. Desktop Ram
1. 2 full height mini slots
1. Serial redirection over Lan
1. Onboard video support

Examples:
|| Name || mPciE Full Height || mPciE Half Height || form factor || socket || price ||
|| [http://www.advantech.com/products/1-2JKKGR/AIMB-274/mod_203f9ab2-e7cd-4490-a536-bbd8d2e90b1f.aspx Advantech AIMB-274]|| 1 || 1 || mini-itx || 1150|| ?||
|| [http://www.advantech.com/products/1-2JKKGR/AIMB-230/mod_FFC44172-FD42-46B1-A83A-7F46AE1C6D87.aspx Advantech AIMB-230]|| 1 || 1 || mini-itx || 1150 w embedded i5 4300|| $692||
|| [http://www.advantech.com/products/1-2JKKGR/AIMB-203/mod_A46984F8-CAA9-433A-A720-E1815A8C16A3.aspx Advantech AIMB-203]|| 2 || 0 || thin-itx || 1150|| ?||
|| [http://www.advantech.com/products/1-2JKKGR/AIMB-215/mod_2FD07EF0-7445-4131-A3B0-379548B78E27.aspx Advantech AIMB-215]|| 2 || 0 || 12v thin-itx || embedded quad core atom|| ?||
|| [https://www.asus.com/Motherboards/Q87T/ ASUS Q87T/CSM] || 1 || 1 ||  thin-itx || 1150 || [http://www.newegg.com/Product/Product.aspx?Item=N82E16813132071 $150] ||
|| [http://www.jetwaycomputer.com/NF9G.html JetWay JNF9G-QM77] || 1 || 1 || mobile ITX || G2, 3rd gen mobile || [http://www.newegg.com/Product/Product.aspx?Item=N82E16813153253 $200] ||
|| [http://b2b.gigabyte.com/products/product-page.aspx?pid=4705#sp Gigabyte M10RDI] || 1 || 1 || mini itx || embedded fanless atom || price ||



Interesting but not suitable:
|| Name || mPciE Full Height || mPciE Half Height || form factor || socket || price ||
|| [http://www.asrock.com/ipc/overview.asp?Model=SBC-210 ASRock SBC-210] || 1 || 1 || 5.8x4.0 inch || Atom || || 9-36v in ||
|| [http://arduino.cc/en/ArduinoCertified/IntelGalileo Intel Galileo] || 1 || 0 || arduino compatible || 32bit intel SoC|| ||5v ||



== New Case Design Requirements / adjustments ==

Change PCI opening to match official specs.

If bend to hold PCI card screw is not possible, request screw hole and use right angle adapter.

http://www.pcisig.com/specifications/conventional/conventional_pci/lowp_ecn.pdf

Lower height of case to ensure compatibility with all harnesses.
Replace one fan mounting port with slot for panel mount molex.

Possible replacement of CM mount with pci mount
add additional horizontal pci mounts to rear of case