= BSFB – Datapath API  (Internal) =
These API describes the functionality exported by the modified NEC basestation controller, which will be used by the Datapath controller module.  
== Network Entry Control API Specification ==
This API is called by the datapath manager after it receives appropriate notification from the RM-Datapath API
=== appendMACAcl (MS_MAC_Addr, IPaddress/mask) ===
-	Add  the given MAC address to the ACL (access control list) at the BTS
             -	IP address for the corresponding MAC address is specified along with the mask.
  	-	Done before a connection / flow can be setup.
=== removeMACAcl( MS_MAC_Addr, IPaddress/mask) ===
-	Remove  the given MAC address from the ACL of the BTS
-	IP address for the corresponding MAC address is specified along with the mask.
-	Done before a connection / flow can be setup.
=== acceptMAC(MS_MAC_Addr) ===
=== rejectMAC(MS_MAC_Addr) ===
=== newClientRegistration(MS_MAC_Addr) ===
=== clientDeregistration(MS_MAC_Addr) ===

 
== Radio Level Monitoring ==
=== getAvailableResources () ===
-	Returns the Available DL and UL resources in the BS currently.
=== getMCS(MSID) ===
-	Returns the current Modulation and coding scheme for the given MAC address.
=== getThroughput(MSID) ===
-	Returns the current MAC throughput (Mbps) for the given MAC addess.

=== getPacketLoss(MSID) ===
-	Returns the current packet loss rate and retries for the given service flow.