Changes between Version 3 and Version 4 of Internal/NoiseGenerator/Hardware


Ignore:
Timestamp:
Feb 16, 2007, 5:58:08 PM (17 years ago)
Author:
anonymous
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/NoiseGenerator/Hardware

    v3 v4  
    33The Orbit Noise Generator acts as a radio node for generating a controllable noise source, an important parameter in defining signal-to-noise ratios during ORBIT experimental operations.  Upwards of 100 ONGs will be deployed among ORBIT’s 400 primary radio nodes. ONG, whose block diagram is shown in Figure 1, consist of two printed circuit boards:
    44
    5  1. [wiki:Internal/NoiseGenerator/Hardware/BaBo Baseband Board (BaBo)] a USB enabled baseband processing board centered around Xilinx Spartan 3 FPGA and Analog Devices A/D and Cypress CY7C68013-128AC USB Controller.
     5 1. [wiki:Internal/NoiseGenerator/Hardware/BaBo Baseband Board (BaBo)] a USB enabled baseband processing board centered around Xilinx Spartan 3 FPGA and Analog Devices A/D and Cypress USB Controller.
    66 2. [wiki:Internal/NoiseGenerator/Hardware/WiBo Wireless Board (WiBo)] which is a custom built WLAN radio transceiver board capable of half duplex (one-at-a-time receive-only or transmit-only) operation in one of three frequency bands, namely 4900-5300 MHz, 5400-5875 MHz or 2400-2500 MHz that correspond to the IEEE 802.11 a/b/g world-wide standards, respectively.
    77