Changes between Version 12 and Version 13 of Internal/NoiseGenerator/Hardware/WiBo


Ignore:
Timestamp:
Jan 14, 2007, 4:32:44 AM (18 years ago)
Author:
anonymous
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Internal/NoiseGenerator/Hardware/WiBo

    v12 v13  
    8484At 5.6GHz the frequency control will be approx. +-100kHz or 780 Hz/step.
    8585
    86 === Antennas (A01-A04) ===
     86=== WIC2450A Antennas (A01-A04) ===
    8787
    88 Four antennas (A01-A04) are mounted directly to WiBo102 though provision is made for adding SMA connectors and using off-board antennas if necessary.  Two antennas are primarily for transmission (Tx) and two for receiving (Rx).  Antenna switching is possible for diversity gain. It is also possible to switch all Tx and Rx signals into a single antenna.
     88Four antennas (A01-A04) are mounted directly to WiBo102 though provision is made for adding SMA connectors and using off-board antennas if necessary.  Two antennas are primarily for transmission (Tx) and two for receiving (Rx).  Antenna switching is possible for diversity gain. It is also possible to switch all Tx and Rx signals into a single antenna. All four antennas are [attachment:WIC2450A.pdf WIC2450A] low-cost dual mode 2.4 – 2.5 GHz and 4.9 – 6.0 GHz SMD dipoles with peak gains of 2dBi and 3 dBi respectively.
    8989
    9090== PCB ==