Changes between Version 37 and Version 38 of Hardware/jCM/dCM3


Ignore:
Timestamp:
Jan 11, 2013, 2:16:17 AM (11 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3

    v37 v38  
    1 [[TOC(Hardware/cCM/cCM3/*, depth=3)]]
     1[[TOC(Hardware,Hardware/jCM, Hardware/jCM/dCM3*, depth=4)]]
    22
    33=== Version 3 (CM3) ===
    … …  
    1515The entire CM3 will is small enough to be mounted inside the case of the Orbit nodes and is powered off of the 5V standby voltage from the node power supply. The CM is also able to communicate through serial in either crossover or straight cable settings by configuring jumpers, and through a standard DB9 connector or a 5x2 0.1" spaced header.
    1616
    17 Pages:[[BR]]
    18  * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/00-DevelopmentEnvironment Development Environment]
    19  * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/01-HardwareDescription Hardware]
    20  * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/02-SoftwareDescription Software]
    21  * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/03-Usage#InstallingtheCM3 Installation]
    22  * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/03-Usage#UsingtheCM3 Usage]
    23  * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/04-Reimage Firmware Update]
    24 
    25 
     17Similarly to the CM1 and CM2 all the [wiki:Hardware/jCM/dCM3/bHardware hardware], [wiki:Hardware/jCM/dCM3/aDevEnv Development], and [wiki:Hardware/jCM/dCM3/cSoftware software] information is provided, as well as detailed [wiki:Hardware/jCM/dCM3/dUsage usage] information.