Changes between Version 4 and Version 5 of Hardware/hNodes/cNodeVer3/dAssembly/cBios/abLV67J


Ignore:
Timestamp:
Dec 5, 2013, 5:59:05 PM (11 years ago)
Author:
Ilya Chigirev
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/hNodes/cNodeVer3/dAssembly/cBios/abLV67J

    v4 v5  
    5858
    5959[http://www.paoloiannelli.com/tag/flashdisable/]
     60
     61STUB
     62
     63For use as console:
     64Making Switch:
     65
     661. Take switch from bin
     672. Cut 4 wires, 24awg, 2 black, 1 blue, 1 red
     683. Strip ends of wires, short on 1 side, about 1cm on other
     694. crimp short molex pins onto ends
     705. solder other ends to switch.
     71 1. Blue to terminal by mark (led positive)
     72 2. Black opposite it.
     73 3. Other two terminals get red and black, orientation doesn't matter. (switch)
     746. cut heat shrink to length, slide over wires down to terminal
     757. shrink
     768. twist wire pairs to keep separate
     779. plug pins into molex terminals.
     78 1. red/black to 2 pin
     79 2. blue/black to ends of 3 pin
     80
     81
     82
     83
     84====== BIOS Settings (bios version 1.1J): ======
     85* Main
     86 * Boot Features (get right name)
     87  1. Quick Boot (ON)
     88  2. Console Redirection (ON)
     89   * Terminal Type (ANSI)
     90  3. UEFI Boot (OFF)
     91* Advanced
     92 1. Processor Configuration
     93  1. Intel (R) HT Technology (ON)
     94  2. Intel (R) Virtualization Technology (ON) (Default)
     95 2. System Agent Configuration
     96  1. Intel VT for directed IO (ON)
     97 3. Network Configuration
     98  1. LAN OPROM Selection (ON)
     99  2. Wake on PCH LAN (OFF)
     100 4. AMT Configuration (Maybe needed, built in serial over lan?)
     101  1. Disable
     102 5. ME configuration
     103  1. Disable
     104* Other
     105 1. SIO config
     106  1. Paraller port (disabled)
     107 1. Hardware Monitor
     108  1. CPU warning temp (90C)
     109  1. Fan control (by temperature)
     110  1. Fan control threshold (40c)
     111* Boot Order
     112 1. Usb Hdd
     113 1. If Network card
     114  1. 0100
     115 1. If no network card
     116  1. 00C8
     117 1. Hdd0
     118
     119
     120====== Flashing BIOS ======
     121
     122backup first
     123
     124from readme:
     125Flash Method:
     126
     1271. Please make a boot-able Disk which could booting into DOS environment.
     1282. Un-zip attached files and copy it into boot-able Disk.
     1293. Power on the system and flash the BIOS under the DOS environment.
     130 1. First, Backup the current BIOS FPT -D nodeXX-XX-bak.bin
     131 2. The instruction will be "C:/fpt -savemac -f 67J12.BIN"
     1324. Please turn off the system and clean CMOS by Jumper.
     1335. Turn on the system and update BIOS successful.