Changes between Version 17 and Version 18 of Hardware/dInfrastructure/qPowerMeasurment


Ignore:
Timestamp:
08/27/13 18:28:12 (6 years ago)
Author:
pavan717
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/dInfrastructure/qPowerMeasurment

    v17 v18  
    5555
    5656|| [[Image(board.PNG, 400px)]] ||
    57 || Figure : Connection  ||
     57|| Figure 3: Connection  ||
    5858 
    5959[[BR]]
     
    8484 
    8585|| [[Image(IndepPinOff-Set.PNG, 600px)]] ||
    86 || Figure : Chip Off-Set  ||
     86|| Figure 4: Chip Off-Set  ||
    8787[[BR]]
    8888     
     
    105105
    106106|| [[Image(Node Mapping.PNG, 400px)]] ||
    107 || Figure : The Grid  ||
     107|| Figure 5: The Grid  ||
    108108[[BR]]
    109109
     
    111111
    112112|| [[Image(Mapping Results.PNG, 300px)]] ||
    113 || Figure : Node Mapping Results  ||
     113|| Figure 6: Node Mapping Results  ||
    114114[[BR]]
     115
     116The chart shown above displays the results of the first 12 breaker switches mapped to their proper outlets.  As shown above except for breaker switch 12, switches 1-11 have total of 3 outlets connected to each of them. This is because outlets 2, 6, 10, 14, 35 and 36 are not connected to any of the first 12 breaker switches.  Total of 24 nodes are connected to those outlets that will be mapped to the remaining 22 breaker switches.
    115117