Context Navigation

qPowerMeasurment

-              v9
+              v10
 ) Total of 4 nodes are connected to one outlet.[[BR]]
 ) 2-3 Outlets are connected to a single breaker switch.[[BR]]
 ) On the breaker board behind each breaker switch there is a toroid.[[BR]]
+) On the breaker board there is a toroid connected behind each breaker switch.[[BR]]
 ) A Brultech Micro-40 Donut Style toroid is used to scale down the current at a ratio of 40A to 26.23mA.[[BR]]
 ) The ends of the toroid sensors are connected to the ORBIT Power Sensing Platform.[[BR]]
 …
 [[BR]]
+: Upload the following code to the Arduino Board:
 ----