==== SB2 ====
[[TOC(Hardware, Hardware/bDomains, Hardware/bDomains/cSandboxes*, depth=6)]]

===== RF Connections =====
 The X310's connected to the nodes in this sandbox are interconnected via coax cables as follows with a 30dB attenuator on the TX/RX side of each link for protection. This setup is designed to facilitate FDD dependent experiments.

 [[Image(SB2 X310 Connections.png)]]

[[BR]]
===== Using of images based on baseline before June 9, 2017 =====
 Images built using baseline prior to June 9, 2017 may not work correctly. After imaging, the node will not be accessible via SSH due to the add-on NIC (for X310 connectivity) changing the order of the ethernet interfaces. To repair your image, connect to the node via the [wiki:Hardware/jCM/dCM3/dUsage#SerialConsoleoverTelnettunnel CM serial console] and run the following commands.
 {{{
echo "blacklist mlx4_core" >> /etc/modprobe.d/blacklist.conf

echo "mlx4_core" >> /etc/modules

depmod -a

update-initramfs -u

reboot
}}}