= USRP2 - Front end calibration data = == Description == Characteristics of USRP's front end were measured against an RF reference: 1. Agilent ESG Vector Signal Generator (E4438C) for the USRP2's receiver [[BR]] USRP2 receiver measures the frequency and power level of known signals sent from signal generator. 2. Agilent ESA-E Series Spectrum Analyzer (E4405) for USRP's transmitter [[BR]] USRP2 transmitter sends specified signal with frequency and amplitude level that is measured by spectrum analyzer. == Set Up == == Procedures == == Data & Plots == || Node13-8 Receiver -- [http://www.orbit-lab.org/attachment/wiki/Documentation/GNURadio/Tutorials/RFCalibData/node13-8.txt data] || || [[Image(node13-8_2.4GHz_rxpwr.png, width=500px)]] || [[Image(node13-8_5.0GHz_rxpwr.png, width=500px)]] ||