Changes between Version 53 and Version 54 of Documentation/CGettingStarted

Timestamp:

Jan 15, 2013, 12:23:01 AM (11 years ago)

Author:

ssugrim

Comment:

—

Documentation/CGettingStarted

@@ -16 +16 @@
 
 '''During your approved time slot''', you can then log into the '''console''' corresponding to the following table using SSH: 
-
-||Main grid (400 nodes)|| console.grid.orbit-lab.org ||
-||Sandbox 1 (2 nodes)|| console.sb1.orbit-lab.org ||
-||Sandbox 2 (2 nodes)|| console.sb2.orbit-lab.org ||
-||Sandbox 5 (2 nodes)|| console.sb5.orbit-lab.org ||
-||Sandbox 6 (2 nodes)|| console.sb6.orbit-lab.org ||
-||Sandbox 7 (2 nodes)|| console.sb7.orbit-lab.org ||
-||Sandbox 8 (2 nodes)|| console.sb8.orbit-lab.org ||
+|| Name || Nodes || Console FQDN || Special Resources ||
+||Main grid || 400 || console.grid.orbit-lab.org || USRP2, USRP1, Blue too, Zigbee, etc... ||
+||Sandbox 1 || 2 || console.sb1.orbit-lab.org || None ||
+||Sandbox 2 || 2 || console.sb2.orbit-lab.org || None ||
+||Sandbox 3 || 2 || console.sb3.orbit-lab.org || USRP2 ||
+||Sandbox 4 || 9 || console.sb4.orbit-lab.org || RF isolated nodes + mixer ||
+||Sandbox 5 || 2 || console.sb5.orbit-lab.org || USRP1 ||
+||Sandbox 6 || 2 || console.sb6.orbit-lab.org || WinC2R ||
+||Sandbox 7 || 2 || console.sb7.orbit-lab.org || None ||
+||Sandbox 8 || 2 || console.sb8.orbit-lab.org || None ||
+||Sandbox 9 || 11 || console.sb9.orbit-lab.org || Netfpga + Openflow ||
 
 
-For e.g to access the sandbox2,
+For example,  to access the sandbox2,
 {{{
 yourhost>ssh username@console.sb2.orbit-lab.org
 }}}
 
-When you have successfully logged in, you can start an experiment using the [wiki:NodeHandler nodehandler]. First time users are '''highly''' encouraged to reserve time on a sandbox instead of the main grid, and start with the built-in ''Hello World'' experiment. 
+When you have successfully logged in, you can start an experiment using the [wiki:NodeHandler Omf Framework]. First time users are '''highly''' encouraged to reserve time on a sandbox instead of the main grid, and start with the built-in ''Hello World'' experiment. 
  * Before we begin using the nodes, it's a good idea to check their status first. This is done with the omf stat command.This will typically produce a result like:
 
@@ -162 +165 @@
 
 If you are still unsure what Orbit is, please read the [wiki:FAQ FAQ] and the [wiki:Tutorial Tutorial], otherwise go ahead and [http://www.orbit-lab.org/userManagement/register register].
-
-