Changes between Version 19 and Version 20 of Documentation/CGettingStarted


Ignore:
Timestamp:
Feb 13, 2006, 8:44:58 PM (18 years ago)
Author:
seskar
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Documentation/CGettingStarted

    v19 v20  
    77A typical experiment requires the following three steps:
    88
    9  * Reservation
     9 * [wiki:ReservationTutorial Reservation]
    1010 * Running the experiment
    11  * Analyzing the results
    12 
    13 == Reservation ==
    14 
    15 As this is a wireless testbed, it is difficult to run multiple experiments without interference. Therefore, we currently only support one experiment at a time on the grids. In Orbit speak, a grid is a set of nodes on which can be used to run experiments. In the present setup, the testbed consists of a 20*20 grid of nodes, and an array of sandboxes (1*2 node grids).
    16 
    17 There are multiple [wiki:SandBoxes sandboxes] (2 nodes) available, which are development and test environments intended to reduce the time experimenters need on the main grid. Ideally, experimenters develop their software (application programs, routing protocols, measurement instrumentation, etc.) on offsite machines and then use the sandboxes for integration with the orbit environment and orbit software infrastructure. Once the experiment runs successfully in the sandbox environment, it can be moved to the main grid with few modifications.
    18 
    19 Reservations for sandboxes or the main grid can be made [https://www.orbit-lab.org/schedule/ here].
    20 
    21 Note, that a reservation is just a request. You will receive an email when your slot is approved.
     11 * [wiki:AnalyzingResults Analyzing the results]
    2212
    2313== Running the Experiment ==